A
-
Abrasive wear
Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
-
Acceleration optimization
The Elimination of Singularity to Track Aerial Objects Using a 3-DOF Pedestal [Volume 18, Issue 1, 2022, Pages 77-89]
-
Active Thermography
Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using Pulse Thermography [Volume 18, Issue 4, 2022, Pages 77-87]
-
Active vibration control
Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
-
Actuator Rate Saturation
Designing a Generalized Predictive Control with Self-Tuning Regulator Structure to Prevent the Effect of Actuator Rate Saturation [Volume 18, Issue 2, 2022, Pages 79-96]
-
Adaptive fuzzy observer
Designing an Adaptive Fuzzy Extended State Observer for Nonlinear Affine Systems with External Disturbance [Volume 18, Issue 2, 2022, Pages 109-124]
-
Additive manufacturing
Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using Pulse Thermography [Volume 18, Issue 4, 2022, Pages 77-87]
-
Additive manufacturing
Experimental Study and Optimization of the Powder Coating Layer in the Selective Laser Sintering Process [Volume 18, Issue 4, 2022, Pages 119-131]
-
Adhesive
Investigating the Effect of 2-D Defects on Tensile and Creep Behavior of Single-lap Ceramic-metal Adhesive Joints [Volume 18, Issue 2, 2022, Pages 67-78]
-
Adhesive wear
Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
-
Aerodynamic Coefficients
Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
-
Airplane
Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
-
Analytical modeling
Analytical Modeling of Triangular Plate Deflection under Gaseous Detonation Loading [Volume 18, Issue 3, 2022, Pages 41-52]
-
Analytical Relationship
Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
-
Atomic force microscope
Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
-
Axial buckling
Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
B
-
Blade powder dispersion
Experimental Study and Optimization of the Powder Coating Layer in the Selective Laser Sintering Process [Volume 18, Issue 4, 2022, Pages 119-131]
-
Blast Loading
Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
-
Booster Landing
Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
-
Brinson model
Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
C
-
CAD/CAM
Experimental Investigation on the Impact Resistance of CAD/CAM Fabricated Dental Restorations Made of Zirconia Nano Powder Stabilized by Yttrium Oxide [Volume 18, Issue 3, 2022, Pages 1-12]
-
Central Composite Design
Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid [Volume 18, Issue 2, 2022, Pages 169-181]
-
Central Composite Design
Experimental Study and Optimization of the Powder Coating Layer in the Selective Laser Sintering Process [Volume 18, Issue 4, 2022, Pages 119-131]
-
Chattering
Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
-
Chattering
Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
-
Circular plate
Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
-
Circumferential buckling
Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
-
Colburn factor
Numerical Simulation of the Effect of Using a Finned Tube on the Thermal Efficiency of Heat Exchangers [Volume 18, Issue 1, 2022, Pages 53-76]
-
Compressor cracked blade
Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
-
Constant Threshold
Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
-
Contrary mechanisms
Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
-
Cylindrical Shell
Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
-
Cylindrical Shell
Investigating the Energy Absorption Parameters of Steel Cylindrical Shells Filled with Polyethylene Subjected to Quasi-static Loading [Volume 18, Issue 4, 2022, Pages 65-76]
-
Cylindrical shells
Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
D
-
Data Fusion
Implementation of GPS / INS Fusion Algorithm Using GPS Pseudo-Range [Volume 18, Issue 4, 2022, Pages 105-118]
-
Decentralized Control
Formation Control of Flying Robots Using Constrained Model Predictive Control While Tracking of Moving Target in Presence of Obstacles [Volume 18, Issue 4, 2022, Pages 29-47]
-
Dental Restorations
Experimental Investigation on the Impact Resistance of CAD/CAM Fabricated Dental Restorations Made of Zirconia Nano Powder Stabilized by Yttrium Oxide [Volume 18, Issue 3, 2022, Pages 1-12]
-
Describing Function
Designing a Generalized Predictive Control with Self-Tuning Regulator Structure to Prevent the Effect of Actuator Rate Saturation [Volume 18, Issue 2, 2022, Pages 79-96]
-
Discrete Time Sliding Mode
Line of Sight Rate Estimation Using Discrete-Time Sliding Mode Extended State Observer [Volume 18, Issue 2, 2022, Pages 51-66]
-
Disk
Transient Temperature Field Analysis of FGM Brake Disk and Pad as a Symmetric Three-Dimensional Model [Volume 18, Issue 1, 2022, Pages 41-52]
-
Distance Metering
Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
-
Drag forces
Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
-
Dynamic Analysis
Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
-
Dynamic Performance
Using the Lateral Tire Force to Maneuverability Increment of a Three-wheeled Vehicle During Critical Conditions [Volume 18, Issue 4, 2022, Pages 163-179]
E
-
Elastic foundation
Analysis of Free Vibrations of Functionally Graded Porous Beams on Elastic Foundation in Thermal Environment Using Differential Quadrature Method [Volume 18, Issue 1, 2022, Pages 183-199]
-
Elastic modulus
Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
-
Empirical modeling
The Prediction of Center of Mass Displacement of Triangular Plate Using Non-dimensional Analysis [Volume 18, Issue 4, 2022, Pages 17-27]
-
Energy Absorption
Investigating the Energy Absorption Parameters of Steel Cylindrical Shells Filled with Polyethylene Subjected to Quasi-static Loading [Volume 18, Issue 4, 2022, Pages 65-76]
-
Energy method
Analytical Modeling of Triangular Plate Deflection under Gaseous Detonation Loading [Volume 18, Issue 3, 2022, Pages 41-52]
-
Experimental Investigation
Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
-
Experimental study
Experimental Study of the Effect of Effective Parameters on the Thermal Conductivity of a Five-component Hybrid Nanofluid [Volume 18, Issue 3, 2022, Pages 141-154]
-
Extended State Observer
Line of Sight Rate Estimation Using Discrete-Time Sliding Mode Extended State Observer [Volume 18, Issue 2, 2022, Pages 51-66]
F
-
Fatigue life estimation
Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
-
FDM parameters
Investigation of the Effect of FDM 3D Printing Parameters on Conical Shape Recovery in the 4D Printing Process [Volume 18, Issue 4, 2022, Pages 133-146]
-
FDM Process
Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using Pulse Thermography [Volume 18, Issue 4, 2022, Pages 77-87]
-
FGM
Transient Temperature Field Analysis of FGM Brake Disk and Pad as a Symmetric Three-Dimensional Model [Volume 18, Issue 1, 2022, Pages 41-52]
-
Fin tube
Numerical Simulation of the Effect of Using a Finned Tube on the Thermal Efficiency of Heat Exchangers [Volume 18, Issue 1, 2022, Pages 53-76]
-
First order shear deformation theory
Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
-
First order shear deformation theory
Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
-
First-order shear deformation Theory
Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
-
Flexoelectric nanotube carrying fluid
Nonlinear Response and Stability of Flexoelectric Nanotube Conveying Fluid under Temperature Field using Nonlocal Strain Gradient Theory [Volume 18, Issue 1, 2022, Pages 21-39]
-
Fluid-Induced Vibration
Fluid Flow Effects on Size-dependent Dynamic Response of Cantilever Microbeams using Modified Strain Gradient and Hyperbolic Shear Deformation Beam Theory [Volume 18, Issue 3, 2022, Pages 53-68]
-
Formation control
Formation Control of Flying Robots Using Constrained Model Predictive Control While Tracking of Moving Target in Presence of Obstacles [Volume 18, Issue 4, 2022, Pages 29-47]
-
Fracture Mechanics
Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
-
Frictional work
Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
-
Friction factor
Numerical Simulation of the Effect of Using a Finned Tube on the Thermal Efficiency of Heat Exchangers [Volume 18, Issue 1, 2022, Pages 53-76]
-
Functionally graded material
Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
-
Functionally graded materials
Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
-
Functionally Graded Porous Beams
Analysis of Free Vibrations of Functionally Graded Porous Beams on Elastic Foundation in Thermal Environment Using Differential Quadrature Method [Volume 18, Issue 1, 2022, Pages 183-199]
-
Fused Deposition Modeling
Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid [Volume 18, Issue 2, 2022, Pages 169-181]
-
Fuzzy-PID controller
Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
G
-
Galerkin method
Investigation of Transient Nonlinear Response of Fiber Metal Laminates (FML’s) under Uniform Time-dependent Pressure Loading [Volume 18, Issue 3, 2022, Pages 109-125]
-
Gaseous detonation
Analytical Modeling of Triangular Plate Deflection under Gaseous Detonation Loading [Volume 18, Issue 3, 2022, Pages 41-52]
-
Gas Turbine
Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
-
Gas Turbine
Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
H
-
Handling
Using the Lateral Tire Force to Maneuverability Increment of a Three-wheeled Vehicle During Critical Conditions [Volume 18, Issue 4, 2022, Pages 163-179]
-
Hankel transform
Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
-
Heat Transfer
Transient Temperature Field Analysis of FGM Brake Disk and Pad as a Symmetric Three-Dimensional Model [Volume 18, Issue 1, 2022, Pages 41-52]
-
Heat Transfer
Numerical Simulation of the Effect of Using a Finned Tube on the Thermal Efficiency of Heat Exchangers [Volume 18, Issue 1, 2022, Pages 53-76]
-
Hybrid nanofluids
Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
-
Hybrid nanofluids
Experimental Study of the Effect of Effective Parameters on the Thermal Conductivity of a Five-component Hybrid Nanofluid [Volume 18, Issue 3, 2022, Pages 141-154]
-
Hyperbolic Beam Theory
Fluid Flow Effects on Size-dependent Dynamic Response of Cantilever Microbeams using Modified Strain Gradient and Hyperbolic Shear Deformation Beam Theory [Volume 18, Issue 3, 2022, Pages 53-68]
I
-
Impact Strength
Experimental Investigation on the Impact Resistance of CAD/CAM Fabricated Dental Restorations Made of Zirconia Nano Powder Stabilized by Yttrium Oxide [Volume 18, Issue 3, 2022, Pages 1-12]
-
Impulsive loading
Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
-
Inertial Navigation
Implementation of GPS / INS Fusion Algorithm Using GPS Pseudo-Range [Volume 18, Issue 4, 2022, Pages 105-118]
-
Internal detonation
The Prediction of Center of Mass Displacement of Triangular Plate Using Non-dimensional Analysis [Volume 18, Issue 4, 2022, Pages 17-27]
-
Inverse Kinematic Problem
The Elimination of Singularity to Track Aerial Objects Using a 3-DOF Pedestal [Volume 18, Issue 1, 2022, Pages 77-89]
-
Inverted pendulum
Designing an Adaptive Fuzzy Extended State Observer for Nonlinear Affine Systems with External Disturbance [Volume 18, Issue 2, 2022, Pages 109-124]
J
-
Jump Phenomenon
Study of Phenomena of Jump and Chaos in a Non-linear Beam with Concentrated Mass Under the Effects of Water Flow [Volume 18, Issue 2, 2022, Pages 157-167]
K
-
Kalman Filter
Implementation of GPS / INS Fusion Algorithm Using GPS Pseudo-Range [Volume 18, Issue 4, 2022, Pages 105-118]
L
-
Laser Detection
Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
-
Leading Edge Detection
Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
-
Lift force
Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
-
LOS rate Estimation
Line of Sight Rate Estimation Using Discrete-Time Sliding Mode Extended State Observer [Volume 18, Issue 2, 2022, Pages 51-66]
-
Lyapanov stability
Designing an Adaptive Fuzzy Extended State Observer for Nonlinear Affine Systems with External Disturbance [Volume 18, Issue 2, 2022, Pages 109-124]
-
Lyapunov' s Theory
Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
M
-
Maximum displacement
Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
-
Microbeam
Fluid Flow Effects on Size-dependent Dynamic Response of Cantilever Microbeams using Modified Strain Gradient and Hyperbolic Shear Deformation Beam Theory [Volume 18, Issue 3, 2022, Pages 53-68]
-
Mixing efficiency
Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
-
Modal Analysis
Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
-
Modelling
Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
-
Model Predictive Control
Designing a Generalized Predictive Control with Self-Tuning Regulator Structure to Prevent the Effect of Actuator Rate Saturation [Volume 18, Issue 2, 2022, Pages 79-96]
-
Model test
Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
-
Model validation
Experimental Study of the Effect of Effective Parameters on the Thermal Conductivity of a Five-component Hybrid Nanofluid [Volume 18, Issue 3, 2022, Pages 141-154]
-
Molecular Dynamics
Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
-
Monolayer
Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
-
Multi-layered mixed configuration
Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
-
MWCNT Comparison of thermophysical properties
Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
N
-
Nano-scratching
Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
-
Natural frequency
Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
-
Natural frequency
Fluid Flow Effects on Size-dependent Dynamic Response of Cantilever Microbeams using Modified Strain Gradient and Hyperbolic Shear Deformation Beam Theory [Volume 18, Issue 3, 2022, Pages 53-68]
-
Nondestructive Test
Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using Pulse Thermography [Volume 18, Issue 4, 2022, Pages 77-87]
-
Nonlinear Beam
Study of Phenomena of Jump and Chaos in a Non-linear Beam with Concentrated Mass Under the Effects of Water Flow [Volume 18, Issue 2, 2022, Pages 157-167]
-
Nonlinear free and forced vibrations
Nonlinear Response and Stability of Flexoelectric Nanotube Conveying Fluid under Temperature Field using Nonlocal Strain Gradient Theory [Volume 18, Issue 1, 2022, Pages 21-39]
-
Non-linear Optimal Control
Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
-
Nonlinear response
Investigation of Transient Nonlinear Response of Fiber Metal Laminates (FML’s) under Uniform Time-dependent Pressure Loading [Volume 18, Issue 3, 2022, Pages 109-125]
-
Nonlinear vibrations
Study of Phenomena of Jump and Chaos in a Non-linear Beam with Concentrated Mass Under the Effects of Water Flow [Volume 18, Issue 2, 2022, Pages 157-167]
-
Nonsingular Terminal
Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
-
Numerical Simulation
Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid [Volume 18, Issue 2, 2022, Pages 169-181]
-
Numerical Simulation
Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
-
Numerical study
Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
O
-
Observer estimation error
Designing an Adaptive Fuzzy Extended State Observer for Nonlinear Affine Systems with External Disturbance [Volume 18, Issue 2, 2022, Pages 109-124]
-
Open-end pressure-swirl atomizer
Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
-
Optimal Guidance
Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
-
Optimization
Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
P
-
Pad
Transient Temperature Field Analysis of FGM Brake Disk and Pad as a Symmetric Three-Dimensional Model [Volume 18, Issue 1, 2022, Pages 41-52]
-
Phase transformation models
Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
-
Piezoelectric
Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
-
Piezoelectric
Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
-
Piezoelectric layer
Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
-
Planing craft
Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
-
Ploughing work
Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
-
Poly Vinyl Alcohol
Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
-
Potential functions
Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
-
Pulsed Laser
Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
Q
-
Quasi-static
Investigating the Energy Absorption Parameters of Steel Cylindrical Shells Filled with Polyethylene Subjected to Quasi-static Loading [Volume 18, Issue 4, 2022, Pages 65-76]
R
-
Ramp
Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
-
Redundancy
The Elimination of Singularity to Track Aerial Objects Using a 3-DOF Pedestal [Volume 18, Issue 1, 2022, Pages 77-89]
-
Repeated loading
Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
-
Repeated loading
Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
-
Repeated loading
Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
-
RNG
Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
-
Robust Control
Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
-
Robust Control
Designing a Generalized Predictive Control with Self-Tuning Regulator Structure to Prevent the Effect of Actuator Rate Saturation [Volume 18, Issue 2, 2022, Pages 79-96]
-
Robust Control
Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
-
Rotating Structure
Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
-
Rotating tapered beam
Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
-
RSM
Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
-
Runge Kutta method
Investigation of Transient Nonlinear Response of Fiber Metal Laminates (FML’s) under Uniform Time-dependent Pressure Loading [Volume 18, Issue 3, 2022, Pages 109-125]
S
-
Scramjet
Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
-
SDRE
Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
-
Selective Laser Sintering
Experimental Study and Optimization of the Powder Coating Layer in the Selective Laser Sintering Process [Volume 18, Issue 4, 2022, Pages 119-131]
-
Shanon Entropy
Investigating the Effective Parameters on Vehicle Stability and Multi-objective Optimization of its Dynamic Indices [Volume 18, Issue 2, 2022, Pages 37-50]
-
Shape memory alloy
Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
-
Shape Memory Polymer
Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid [Volume 18, Issue 2, 2022, Pages 169-181]
-
Sheet forming
Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
-
Single-lap joint
Investigating the Effect of 2-D Defects on Tensile and Creep Behavior of Single-lap Ceramic-metal Adhesive Joints [Volume 18, Issue 2, 2022, Pages 67-78]
-
Singularity
The Elimination of Singularity to Track Aerial Objects Using a 3-DOF Pedestal [Volume 18, Issue 1, 2022, Pages 77-89]
-
Sled
Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
-
Sliding Mode
Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
-
Sliding Mode Control
Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
-
Sliding Mode Control
Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
-
Slipper
Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
-
Sound transmission loss
Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
-
Stability
Investigating the Effective Parameters on Vehicle Stability and Multi-objective Optimization of its Dynamic Indices [Volume 18, Issue 2, 2022, Pages 37-50]
-
Stagnation pressure loss
Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
-
Stiffened plate
Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
-
Strapdown Seeker
Line of Sight Rate Estimation Using Discrete-Time Sliding Mode Extended State Observer [Volume 18, Issue 2, 2022, Pages 51-66]
-
Sub-optimal guidance law
Sum-of-Squares Optimization Based Approximate Dynamic Programming for Time-Varying Systems and Its Application in Suboptimal Guidance Law Design [Volume 18, Issue 4, 2022, Pages 89-103]
-
Supersonic Flow
Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
-
Super Twisting
Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
T
-
Taguchi
Investigating the Effective Parameters on Vehicle Stability and Multi-objective Optimization of its Dynamic Indices [Volume 18, Issue 2, 2022, Pages 37-50]
-
Temperature Field
Nonlinear Response and Stability of Flexoelectric Nanotube Conveying Fluid under Temperature Field using Nonlocal Strain Gradient Theory [Volume 18, Issue 1, 2022, Pages 21-39]
-
Thermal conductivity
Experimental Study of the Effect of Effective Parameters on the Thermal Conductivity of a Five-component Hybrid Nanofluid [Volume 18, Issue 3, 2022, Pages 141-154]
-
Thermal Environment
Analysis of Free Vibrations of Functionally Graded Porous Beams on Elastic Foundation in Thermal Environment Using Differential Quadrature Method [Volume 18, Issue 1, 2022, Pages 183-199]
-
Thick-walled
Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
-
Thin-walled
Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
-
Timoshenko beam theory
Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
-
TOPSIS
Investigating the Effective Parameters on Vehicle Stability and Multi-objective Optimization of its Dynamic Indices [Volume 18, Issue 2, 2022, Pages 37-50]
-
Tracking Error
Using the Lateral Tire Force to Maneuverability Increment of a Three-wheeled Vehicle During Critical Conditions [Volume 18, Issue 4, 2022, Pages 163-179]
-
Transverse injection
Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
-
Transversely isotropic
Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
-
Transverse Step
Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
-
Triangular plate
Analytical Modeling of Triangular Plate Deflection under Gaseous Detonation Loading [Volume 18, Issue 3, 2022, Pages 41-52]
-
Triangular plate
The Prediction of Center of Mass Displacement of Triangular Plate Using Non-dimensional Analysis [Volume 18, Issue 4, 2022, Pages 17-27]
-
Triangular surfaces
Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
-
Trust force
Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
-
Turbulence Model
Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
U
-
Underwater explosion
Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
V
-
Vectorized High Order Expansions
Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
-
Vibration
Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
-
Viscosity
Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
-
V-Shaped cantilever
Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
W
-
Wave Propagation
Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
-
Welding line
Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
Z
-
Zirconia
Experimental Investigation on the Impact Resistance of CAD/CAM Fabricated Dental Restorations Made of Zirconia Nano Powder Stabilized by Yttrium Oxide [Volume 18, Issue 3, 2022, Pages 1-12]
Your query does not match with any item